UMI Performance 2236 - 1982-2002 GM F-Body Weld In Torque Arm - Straight Crossmember- 2236-B

Description:

UMI's 2236 weld-in torque arm is a great way to get UMI quality and performance in your 3rd and 4th Gen F-Body. The shortened torque arm length improves instant center and provides reduced 60 ft times and enhanced forward traction. The adjustment feature allows for optimizing the pinion angle and ensures a vibration-free driveline at any ride height. The #2236 unit is designed with a straight front cross member to clear tight fitting header/y-pipe set-ups. Since crossmember installation is weld in you have the ability to raise or lower crossmember before welding for perfect clearance. Installation note: Crossmember installation requires welding and cutting to complete installation. Torque arm must be installed with 2-point subframe connectors.Torque Arm Benefits:Removes torque arm from transmission tail shaft to prevent damageEliminates wheel hop on launch and solves forward traction problemsAllows for on-car pinion angle adjustmentsPolyurethane bushings designed to keep road noise at a minimumFront mounting point utilizes a greaseable pivot pointBuild Features:Torque arm constructed of 1.250” x 0.120” DOM steel tubingCrossmember constructed of 1.500” x 0.120” DOM steel tubingTIG Welded 4140 CrMo tube adaptersOn-Car adjuster built using 4140 CrMo steel & heat treated for maximum strengthPolyurethane bushings are greaseable to prolong bushing lifeLaser cut plates ensure hole to hole accuracyRear mounting plates use 0.375” thick mild steelFits stock rear end as well as 12-Bolt, 9” & S60 Rear-End Housings.Brilliant Durable Red or Black powder coatCrMo- CrMo version uses 1.250" x 0.095" 4130 CrMo steel and features 100% TIG welded construction. This adds increased strength and reduces product weight, recommended for vehicles running 10.50’s and faster in the ¼ mile.Rear Torque Arm Hardware Kit – Through bolt rear axle housings require UMI P/N 3003 to complete installation on factory housings, Strange, Moser 9” and most other housings. UMI P/N 2998 should be used on Moser 12-bolt with the four bolt mount design.