UMI Performance 240331 - 1982-1992 GM F-Body Tubular K-member & A-arm Pkg, LS, Factory Springs 240331-R

Description:

We all know weight equals horsepower. UMI’s direct bolt-in replacement K-member and lower a-arm kit instantly removes 25 lbs of front end weight from your ride and helps your existing horsepower work for you. Strong dual tube construction and a host of high-strength features ensure this kit will survive street use, drag strip blasts and autocross action. The K-member is fabricated from CNC machined 3/16” thick mild steel held together by a strong dual tube lower section. Included fabricated motor mounts are used to bolt any LSX engine to the precision machined mounting pads while both factory and aftermarket suspension is located by strong boxed mounting points. Lightening holes are CNC machined into the mounting plates and the tubular construction provides added clearance for aftermarket exhaust. The k-member design permits stock spring and strut use while the lower a-arms feature a spring locating pocket. The lower a-arms feature TIG welded tubular construction, adjustable steering stops and polyurethane bushings. Street and track testing on our test car has shown this k-member and a-arm kit to be strong, reliable and a great upgrade for your high performance ride. Available in tough powder coated red or black finish. Manufactured with pride in Philipsburg, PA – USA. Save $20.00 when purchasing these items as a kit!Note: If using Factory LS A/C the A/C compressor needs relocated when running a UMI tubular k-member, we recommend an A/C relocation kit from www.kwikperf.com. K-member was designed around the LS1 oil pan and also works with the Holley 302 oil pan. Other oil pans may not clear. Included k-member can also be used with a factory SBC engine by not installing the included LSX motor mount stands.Features and benefits:Reduces 25 lbs of front end weightAllows easy installation of any LSX engineLSX adapter mounts work with factory rubber LS motor mounts, polyurethane mounts or UMI’s solid mounts P/N 2323K-member accepts factory springs and lowering springsIncludes new 10.9 mounting hardware for k-member and a-armsDouble tube construction for superior strengthStrong 3/16” thick mild steel engine and suspension mounts held together with 1-1/2” dia DOM tubingCNC machined and jig-built for no hassle installationMIG and TIG weldedDirect bolt-in designLower a-arms are jig-built with polyurethane bushings installed (see P/N 2031 for complete details)Durable red or black powdercoatModular design allows use of coil-overs and/or LS mounts for minimal costManufactured with pride in Philipsburg, PA – USA