Mishimoto Oil Cooler Kit, Black, Thermostatic, fits Ford Mustang GT 2018-2023 MMOC-MUS8-18TBK

	Retailer	Base	Shipping	Tax	Availability	Total Price
	Summit Racing	$805.99	---	---	In Stock	$805.99

Retailer

Base

Shipping

Tax

Availability

Total Price

Summit Racing

$805.99

---

In Stock

$805.99

* RideBuilder may earn a commission when you purchase products from participating retailers linked on this page, at no additional cost to you. Affiliate compensation does not affect which products are displayed, the prices shown, or the order in which retailer offers are listed. Learn more here.

Loading offers...

Specifications:

BrandMishimoto
Part NumberMMOC-MUS8-18TBK
GTIN00811580037498
Inlet Outside Diameter0 in
Outlet Outside Diameter0 in
Base Height2.5 in
ColorBlack
FinishAnodized
Width12.3 in
Core Height0 in
Core Thickness0 in
Core Width18.5 in
Grade TypePerformance
Core TypeBar-and-plate
Inlet Fitting GenderMale
Outlet Fitting GenderMale
Core Row Quantity0
Fluid Capacity1 gal
Core ColorBlack
Inlet Fitting TypeAn Flare
Outlet Fitting TypeAn Flare
Cooler Fluid Capacity1 qt
OptionlabelBlack, Thermostatic
Sellingpoint01Direct Fit For The 2018-2023 Ford Mustang Gt (lhd)
Sellingpoint02Innovative Bar-and-plate Oil Cooler Mounts In The Upper Grille, Allowing More Room For Supercharger Heat Exchangers
Sellingpoint03Mounting Bracket Also Serves As An Air Diversion Panel, Directing The Maximum Amount Of Ambient Air Through The Oil Cooler
Sellingpoint04Pre-made Stainless Steel Braided Oil Lines With Durable -an Fittings
Sellingpoint05Comes With Replacement Lower Radiator Hose To Bypass The Stock Fluid-based Oil Cooler
Sellingpoint06Removes The Stock Fluid-based Oil Cooler For Less Stress On The Engine's Cooling System
Sellingpoint07Billet Aluminum Thermostatic Oil Sandwich Plate
Sellingpoint08Increases Oil Capacity By 1qt
Sellingpoint09Fits With Most Aftermarket Supercharger Kits
Sellingpoint10Mishimoto Lifetime Warranty
Applications2018-2023 Ford Mustang Gt (left Hand Drive Vehicles Only)
CautionIt Is The Installer's Responsibility To Check All Thermostat Plugs, Npt Plugs, Line Fittings, And Other Connections To Assure They Are Fully Tightened Before Operating The Vehicle. Mishimoto Recommends That You Check All Connections At Regular Intervals, Especially During The First Few Miles After Installation.
Core Length (in)18.5 in
Engine Codes5.0 Coyote Iii
IncludesApplication Specific Mounting Bracket / Air Diversion Shield--bar And Plate Oil Cooler--2ft 3in Stainless Steel Braided Hose W/ -10an Fittings--4ft 8in Stainless Steel Braided Hose W/ -10an Fittings--m22 Thermostatic Sandwich Plate--application - Specific, M22 X 1.5 Extended Length Center Bolt--m20 X -10an Straight Fittings--1/8-in Npt Plugs--large O-ring--lower Radiator Hose W/ Worm Gear Clamps--mounting Hardware Set--mishimoto Lifetime Warranty
NoteRequires The Removal Of The Stock Coolant Based Oil Cooler.----installation Requires The Removal Of The Active Grill Shutters. Removal Without Tuning Can Cause A Check Engine Light.----recommended Torque Specification For All Straight Fittings And Banjo Bolts: 15-25 Lb-ftdo Not Exceed The Maximum Torque Rating Of 35 Ft-lb
Overall Height (in)2.5
Overall Length (in)28.6 in
Overall Width (in)12.3
Rows12

Specifications:

Description:

Add some extra cooling power to your 2018-2023 Mustang GT with the Mishimoto Oil Cooler Kit. In 2018-2023, Ford evolved their staple muscle car with a fresh and even more futuristic look on the S550. As the Mustang evolved, we evolved along with it to provide optimal cooling for your modern Mustang. Our engineers started with designing a heat exchanger from the ground up, to provide the largest oil cooler we have to offer and mounted directly to the front of the vehicle for optimal airflow. From there, we also developed an application specific mounting bracket that also serves as a diversion panel to further improve the airflow through the cooler. Our kit also includes a set of direct fit stainless-steel braided lines for a secure conduit to and from the cooler completed with -10AN fittings for a simplified installation. Finally, the Mishimoto 2018-2023 Ford Mustang GT Oil Cooler Kit includes our trusted thermostatic oil sandwich plate to protect against the overcooling of your engine oil. Our kit is available with the option of a silver or black cooler, and is protected under the Mishimoto Lifetime Warranty for a worry-free installation. The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2018-2023 Mustang GT (LHD) oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2018-2023 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.

Description:

Description is loading...

Specifications:

BrandMishimoto

Part NumberMMOC-MUS8-18TBK

GTIN00811580037498

Inlet Outside Diameter0 in

Outlet Outside Diameter0 in

Base Height2.5 in

ColorBlack

FinishAnodized

Width12.3 in

Core Height0 in

Core Thickness0 in

Core Width18.5 in

Grade TypePerformance

Core TypeBar-and-plate

Inlet Fitting GenderMale

Outlet Fitting GenderMale

Core Row Quantity0

Fluid Capacity1 gal

Core ColorBlack

Inlet Fitting TypeAn Flare

Outlet Fitting TypeAn Flare

Cooler Fluid Capacity1 qt

OptionlabelBlack, Thermostatic

Sellingpoint01Direct Fit For The 2018-2023 Ford Mustang Gt (lhd)

Sellingpoint02Innovative Bar-and-plate Oil Cooler Mounts In The Upper Grille, Allowing More Room For Supercharger Heat Exchangers

Sellingpoint03Mounting Bracket Also Serves As An Air Diversion Panel, Directing The Maximum Amount Of Ambient Air Through The Oil Cooler

Sellingpoint04Pre-made Stainless Steel Braided Oil Lines With Durable -an Fittings

Sellingpoint05Comes With Replacement Lower Radiator Hose To Bypass The Stock Fluid-based Oil Cooler

Sellingpoint06Removes The Stock Fluid-based Oil Cooler For Less Stress On The Engine's Cooling System

Sellingpoint07Billet Aluminum Thermostatic Oil Sandwich Plate

Sellingpoint08Increases Oil Capacity By 1qt

Sellingpoint09Fits With Most Aftermarket Supercharger Kits

Sellingpoint10Mishimoto Lifetime Warranty

Applications2018-2023 Ford Mustang Gt (left Hand Drive Vehicles Only)

CautionIt Is The Installer's Responsibility To Check All Thermostat Plugs, Npt Plugs, Line Fittings, And Other Connections To Assure They Are Fully Tightened Before Operating The Vehicle. Mishimoto Recommends That You Check All Connections At Regular Intervals, Especially During The First Few Miles After Installation.

Core Length (in)18.5 in

Engine Codes5.0 Coyote Iii

IncludesApplication Specific Mounting Bracket / Air Diversion Shield--bar And Plate Oil Cooler--2ft 3in Stainless Steel Braided Hose W/ -10an Fittings--4ft 8in Stainless Steel Braided Hose W/ -10an Fittings--m22 Thermostatic Sandwich Plate--application - Specific, M22 X 1.5 Extended Length Center Bolt--m20 X -10an Straight Fittings--1/8-in Npt Plugs--large O-ring--lower Radiator Hose W/ Worm Gear Clamps--mounting Hardware Set--mishimoto Lifetime Warranty

NoteRequires The Removal Of The Stock Coolant Based Oil Cooler.----installation Requires The Removal Of The Active Grill Shutters. Removal Without Tuning Can Cause A Check Engine Light.----recommended Torque Specification For All Straight Fittings And Banjo Bolts: 15-25 Lb-ftdo Not Exceed The Maximum Torque Rating Of 35 Ft-lb

Overall Height (in)2.5

Overall Length (in)28.6 in

Overall Width (in)12.3

Rows12