Edelbrock Victor Small-Block Chrysler Cylinder Head W/ Solid Roller Camshaft 61729

No offers available.

Specifications:

BrandEdelbrock
Part Number61729
GTIN00085347617296
MaterialAluminum
Valve Spring Retainers IncludedYes
Valve Locks IncludedYes
Exhaust Runner Volume62 ccm
Valve Lock MaterialChromoly Steel
Rocker Arms IncludedNo
Cylinder Head Gasket IncludedNo
Valve Cover Gasket IncludedNo
Rocker Arm Studs/bolts IncludedNo
Mounting Hardware IncludedNo
AssembledYes
Grade TypePerformance
Deck Height9.6 in
Deck Thickness0.625 in
Combustion Chamber Volume60 ccm
Intake Runner Volume225 ccm
Intake Valve Diameter2.15 in
Exhaust Valve Diameter1.60 in
Valve Spring Diameter1.55 in
Valve Spring Maximum Lift0.670 in
Guide Plates IncludedNo
Head Casting Number6170f
Valve Springs IncludedYes
Valve Seals IncludedYes
Valves IncludedYes
Camshaft TypeSolid Roller
Cnc PortedNo
Construction TypeComplete
Egr PortNo
Exhaust Port Location+.500
Guide MaterialManganese Bronze
Guide Plate MaterialHardened Steel
Horsepower500-650
Product SeriesVictor
QuantitySold Individually
Retainer IncludedYes
RglWarning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
Seat AngleExhaust 45 Deg/intake 45
Seat MaterialDuctile Iron
Valve Angle16 dd
Valve Stem Diameter0.3438 in

Specifications:

Description:

These Edelbrock #61729 Victor Series cylinder head is for use on 1967-1991, 318-360 c.i.d. Chrysler LA engines. They feature fully CNC ported 58cc combustion chambers and have an intake port volume of 225cc. This cylinder head is an in-line valve design incorporating a 16deg valve angle (stock is 18deg) for improved air flow and increased power levels over heavily ported stock versions. They also feature the Chrysler W5 bolt pattern and have raised exhaust ports. The intake port has also been raised approximately 3/4" and the flange has also been extended to accommodate a stock (race) intake manifold such as our Super Victor #2815. Finally, a 5.56" overall length valve (+0.600" from stock) and raised rocker cover permit larger port cross-sections than in the stock head. Four versions are availablebare, bare with valves, complete (for hydraulic/flat tappet cams and solid roller cams) and Pro Port Raw. End-seal spacers are provided.

Description:

Description is loading...