Edelbrock Crate Engine #46126 Chrysler HEMI Gen III 426, Supercharged, 808 HP, 762 ft-lbs

No offers available.

Specifications:

BrandEdelbrock
Part Number46126
GTIN00085347461264
Grade TypePerformance
Main Bearing Cap Bolt Quantity4
Spark Plugs IncludedYes
Flywheel IncludedNo
Compression Ratio9.9:1
Fuel Injectors IncludedYes
Oil Pan IncludedYes
Timing Cover IncludedYes
Harmonic Balancer IncludedYes
Cylinder Head MaterialAluminum
Air Cleaner TypeNot Included
Camshaft Type226deg/234deg, .619/.612, 116 Lsa Hydraulic Roller
Carburetor TypeNot Included
Construction TypeAssembled
Crankshaft MaterialForged Steel
Cylinder Head TypePerformer Rpm
Displacement426 cc
Distributor IncludedNo
Engine Block MaterialCast Iron
Fuel Rails IncludedYes
Hardware IncludedYes
Horsepower808 hj
Idler Pulley IncludedYes
Induction TypeSupercharged
Intake Manifold TypeDual Pass, Black Textured Powder Coated
Manifold MaterialAluminum
Oil Filter IncludedYes
Piston TypeForged Aluminum
Plug Wire And Boot IncludedNot Included
QuantitySold Individually
Rear Main Seal Type1-piece
RglWarning: This Product Can Expose You To Chromium, Lead, And Zinc Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
Rocker Arm RatioMopar Oem
Rotor TypeEaton Tvs 2650, Black Powder Coated
Throttle Body IncludedYes, Hellcat 92mm
Torque762 lb-ft
TypeChrysler Hemi Gen Iii
Universal Or Specific FitSpecific Fit
Valve Cover IncludedYes
Valve Cover MaterialCast Aluminum
Valve Cover TypeHemi Oem, Black
Water Pump IncludedYes, Standard
Wire Harness IncludedNo

Specifications:

Description:

Edelbrock 426 c.i.d. HEMI crate engine part #46126 produces an astounding 808 horsepower and 762 ft-lbs. of torque. The foundation is based on a new iron Mopar 392 block with a forged Manley crankshaft, forged Manley H-Beam connecting rods and forged aluminum pistons. Sitting on top is an Edelbrock supercharger system with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing, intercooler recovery tank, as well as fuel rails, fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing. Pair with universal heat exchangers for a complete installation. Engine Specifications: Displacement: 426 c.i.d.Bore: 4.090inStroke: 4.050inHorsepower: 808Torque: 762Compression: 9.9:1Block: New Mopar IronCrankshaft: Forged 4340Pistons: Forged Aluminum -5ccCamshaft: 226 Deg /234 Deg , .619/.612, 114 clRocker Arms: Stock Gen III HemiCylinder Heads: Edelbrock Performer RPM #61099Fuel Injectors: 60 lb./hr., SiemensSupercharger: Edelbrock R2650 TVSSupercharger Belt: 100" 6-RibFuel Type: Requires 91 Octane Minimum

Description:

Description is loading...