Edelbrock CYLINDER HEAD 618369

Description:

Cylinder Head Specifications: Combustion chamber volume: 92ccIntake runner volume: 442 (lh) / 451 (rh)Exhaust runner volume: 189ccIntake valve diameter: 2.45" (Valves Not Included)Exhaust valve diameter: 1.85" (Valves Not Included)Valve stem diameter: N/AValve guides: Manganese bronzeDeck thickness: N/AValve spring diameter: Pocket diameter 1.76" (springs not included)Valve spring maximum lift: N/ARocker stud: Use Jesel KPS-381754 shaft-mountGuideplate: N/APushrod diameter: N/AValve angle: 18deg x 4.0deg intake9deg x 3.9deg exhaustExhaust port location: N/ASpark plug fitment: 14mm x 3/4 reach, gasket seat. Intended for high output, large cubic inch racing engines with 4.84" bore spacing, this head is an improvement over existing 18deg designs, such as the Big Chief & Big Duke. The casting is made from A-356 aluminum and is Hot Isostatic Pressing processed (HIP) for superior strength, durability, dimensional stability and exceptional finish quality. These cylinder head features CNC ported intake ports and a raised exhaust runner design for improved flow efficiency. Chambers are fully CNC ported and extra material is included in the deck to allow fine tuning of the combustion chamber design, if desired. Edelbrock and Pat Musi worked with Jesel to improve the valvetrain geometry, delivering Pro-Stock level technology on engines up to 10,000 rpm. Jesel's shaft-mounted system, #KPS-387154, is made from lightweight 7000 series aluminum and features a one-piece stand design that pairs the intake and exhaust stands for improved valvetrain stability. The intake features a 1.820" long fulcrum and is available in 1.60:1 - 1.95:1 rocker ratiosthe exhaust features a 2.000" long fulcrum and available in 1.60:1 - 2.00:1 rocker ratios. Requires Edelbrock valve covers #4259. Match with Edelbrock Victor CNC Series manifolds #28003 and #28005. Pro-Port version available for custom porting.